Setup; Before Starting (Initial Settings); Home Menu - Samsung BD-C8000 User Manual

Setup

Before Starting (Initial Settings)

1. After plugging in the player, the first time you
press the POWER button, this screen comes
up.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
Svenska
2. Press the ▲▼ buttons to select the desired
language, then press the ENTER button.
3. Press the ENTER button to select Start.
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
4. Press the ▲▼ buttons to select the desired
TV aspect ratio, then press the ENTER
button. (See page 37)
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using the Ethernet cable. Please make sure that
the Ethernet cable is connected.
Wired
a
Previous
34
English
> Move " Select
Start
" Select
a Previous
Wireless PBC (WPS)
< Move " Select
d
Skip
5. Press the ◄► buttons to select the desired
Network Settings : Wired, Wireless or PBC
(WPS), and then press the ENTER button.
If you do not know your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, finish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 43~47 for more information about the
Network settings. When done, go to Step 6.
6. Press the OK button.
The Home menu is displayed. For more
information about the Home menu, please
see page 35.
•

Home Menu

Please activate Internet@TV service
to enjoy a variety of Internet Services.
No Disc a Change Device
✎
NOTE
▪
When the player is connected to a TV for the first
time, the player will turn on automatically.
This is not malfunction.
▪
The Home menu will not appear if you do not
configure the initial settings except as noted below.
▪
If you press the BLUE (D) button during the network
setup, you can access the Home menu even if the
network setup is not completed yet.
▪
If you want to display the Initial Setting screen again
to make changes, press the STOP () button on the
front panel of the product for more than 5 seconds
with no disc inserted.
You Tube
internet radio
"
d View Devices Enter