Uniden EXP 920 Owner's Manual page 11

All manuals and user guides at all-guides.com
NOTE
Before you plug the other
end of the telephone cord
into the modular jack on the
wall, charge the battery.
Refer to “Charging the
Battery Pack,” page 14.
CAUTION
Place the power cord so that
it does not create a trip
hazard or where it could
become chafed and create a
fire or electrical hazard.
6. Place the cord inside the
molded channel on the
bottom of the base.
7. Place the base on the screws
and push down until it’s
firmly seated.
8. Plug the other end of the
telephone line cord into the
wall jack.
9. Plug the AC Adapter into a standard 120V AC wall outlet.
Use ONLY the Uniden AC adapter supplied with this phone
and DO NOT use an outlet controlled by a wall switch.
9