Voice Commands - Samsung SCH-U640 User Manual

Voice Commands

Voice Commands is advanced speech recognition software that
can be used to access a variety of functions on your phone. Voice
Commands software automatically voice activates all contacts for
voice dialing and searching, no pre-recording or training needed.
Speak phone numbers naturally to dial, and use voice commands
to navigate phone menus.
Voice Commands Settings
You can adjust the settings and preferences by opening Voice
Commands menu. Using this menu, you can change the
following Voice Command features:
Note: When using the Voice Command system, there are four commands
that are available at all times:
Repeat will repeat the Voice Command prompt.
Readout will read out the phone status or contact details.
Info will offer more information about the Voice Command or read out
the available options.
Quit will exit the Voice Command system.
From the home screen,
1.
press the Voice Commands
key . The Voice
Commands screen appears
in the display.
Press right soft key
2.
for Settings.The following
options appear in the
display:
• TXT Msg Readout: Reads out
the text in a TXT message.
• Confirm Choices: Choose from Automatic, Always Confirm, or
Never Confirm.
– Sensitivity: Sensitivity controls the balance between rejecting too
much, which means the phone frequently does not recognize names,
numbers, or commands, and rejecting too little, which means it
frequently recognizes something even if nothing was said. Choose from
More Sensitive, Automatic, or Less Sensitive.
• Adapt Voice: Use the Adapt Voice menu to adapt digit dialing and
name dialing to your voice.
– Adapt Voice: Lets you adapt your voice, which can improve speech
recognition. Adaptation takes about 60 seconds.
– Reset Voice: Lets you return to the previous voice setting.
Call Functions 33