Advertisement
Tear off the adhesive tape, and then disconnect the
S13
EDP cable from the connector of the panel module,
then put the bracket chassis on a protective cushion.
Turn over the bracket chassis module. Use a Philips-
head screwdriver to remove
unlocking power board and interface board, and
S14
then release the EDP cable from the hook of the
bracket.
(No.1 screw size=M4x8, Torque=6
No.2~7 screw size=M3x7.5, Torque=6
5
4. Disassembly and Assembly Procedures
6pcs
screws for
kgfxcm;
±0.5
kgfxcm)
±0.5
2
3
6
4
1
Remove the circuit boards from the
S15
chassis module carefully, and then
of the cables.
bracket
disconnect all
Advertisement
