Ashford KNITTERS LOOM STAND VARIABLE WIDTH Instructions

For 30cm (12"), 50cm (20") or 70cm (28") looms

KNITTERS LOOM STAND VARIABLE WIDTH

For 30cm (12"), 50cm (20") or 70cm (28") Looms

Tools Required

Ashford Handicrafts Limited

415 West Street, Ashburton 7700, New Zealand

Telephone 64 3 308 9087

sales@ashford.co.nz www.ashford.co.nz

INSTRUCTIONS

Ashford Guarantee

Thank you for purchasing this Ashford product. In the unlikely event there is

any fault in manufacture, please contact the dealer you purchased it from. To

validate the guarantee, please go to www.ashford.co.nz/product-registration

KLSV050321

Table of Contents

Do you have a question about the KNITTERS LOOM STAND VARIABLE WIDTH and is the answer not in the manual?

Page 1 Ashford Guarantee 415 West Street, Ashburton 7700, New Zealand Thank you for purchasing this Ashford product. In the unlikely event there is Telephone 64 3 308 9087 any fault in manufacture, please contact the dealer you purchased it from. To sales@ashford.co.nz www.ashford.co.nz...
Page 2 2. Attach this footrest assembly to one leg and one foot as illustrated with 50mm (2”) bolts and barrel nuts and lightly Enjoy weaving on your Knitters Loom! Ashford Handicrafts Limited 415 West Street, Ashburton 7700, New Zealand Telephone 64 3 308 9087...