Applications Settings - Samsung SGH-A157 User Manual

• Password: The user password, which is
required to connect to the network.
• Protocol: The connection protocol used by the
WAP browser: WAP, HTTP, or Other.
If Protocol is set to HTTP or WAP, the following
field displays:
–
Home URL: The URL address of the page to use
as your home page.
If Protocol is set to HTTP, the following field
displays:
–
Proxy Address: The proxy server address and
port.
If Protocol is set to WAP, the following fields
display:
–
Gateway Address: The Gateway Address.
–
Secure connection: Select On or Off, depending
on whether you have a secure connection.
• Linger Time (Sec.): A time period, in seconds,
after which the network is disconnected, if there
is no new data traffic.
• Advanced: Press
configure the following IP-specific information
options:
–
Static IP: Specify if you want to manually enter
an IP address. Remove the check mark if you
want the server to automatically assign the IP
address.
68
(the key) to
–
Local phone IP: Configure the local phone IP
address.
–
Static DNS: Specify if you want to manually enter
the Domain Name Server (DNS) address. Remove
the check mark if you want the server to
automatically assign the address.
–
Server 1/Server 2: The Domain Name Server
(DNS) addresses.
–
Traffic class: Press
select a Traffic Class of Subscribed, Conversation,
Streaming, Interactive, or Background. Press the
OK soft key to save the change.
Note: The WAP settings vary depending on the
service provider.

Applications Settings

The Applications Settings feature allows you to
configure the functional parameters for most of
the onboard applications. These applications are
described in more detail within other sections of
this manual.
The Applications Settings menu can be used to
access the settings for messages, the browser,
recording audio, the calendar, and the address
book.
From the Home screen, press Menu
Settings Applications Settings.
( the key ) to