Advertisement
Quick Links
LX-MV-400 Microwave Sensor Light Instruction
Packing list in
Quantity
Microwave Sensor Light
1X
3X
Φ6
Plastic Expansion
3X
4x30 Screw
1X
Instruction
IP 44
Use high quality PC lampshade.Strengthen the flexible refraction
of light.And its function of anti-ultraviolet makes the shade not
easy to turn yellow and be broken.
Specifications
Power source: 100-130VAC 60Hz
220-240VAC 50Hz
Rated LED: 25W Max.
HF system: 5.8GHz
Transmission power: <0.2mW
Time setting: 8sec to 12min (adjustable)
Detection range: 2-10m (radii.) (adjustable)
Sensor information
Height of installation2.5~3.5M
Summary
This is a microwave induction switch control LED lights, microwave sensors
placed inside the lamp inside, inside have 108 particles of high brightness LED
and 12 fill light LED granule, deep solved the part of the LED lamps have the
shadow, the total power for 28W. We adopt this sensitive advanced sensor
switchs in lighting control, enabling the light to turn on automatically when one
comes , automatically turn off when one goes out In addition to the widely usage
in the aisle stairs ,living room and bedrooms , it also can be installed in the
bathroom.
Max:10m
Sensing distance adjustment range
76mm
Light-control: 10-2000LUX(adjustable)
Detection angle: 360°
Installation height: 2.5-3.5m (ceiling mount)
Working Temperature:-20~+55℃
LED quantity: 108PCS
LED specifications: 2835
Max:10m
Min:2m
LED lamp consumes power 80% less
than incandescent lamp and 50% less
than fluorescent lamp.
360º
Sensing angle range
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lexing LX-MV-400
Summary of Contents for Lexing LX-MV-400
- Page 1 LX-MV-400 Microwave Sensor Light Instruction 76mm Summary Packing list in Quantity This is a microwave induction switch control LED lights, microwave sensors Microwave Sensor Light placed inside the lamp inside, inside have 108 particles of high brightness LED and 12 fill light LED granule, deep solved the part of the LED lamps have the shadow, the total power for 28W.
- Page 2 Name of each part Mounting holes Mounting holes Percentage brightness adjustment button Mounting holes Function Setting manner: knob It may take times to adjust values before they satisfy your need. Detection range setting(sensitivity) Detection range is the term used to escribe the radii of the roughly circle casting on the ground when installed at the height of 2.5 m.
- Page 3 It is mainly for the adjustment of the delay time from the moment the signal detected and light auto-on till the light auto-off. You can define the delay time to your practical need. But you’d better lower the delay time for the sake of energy saving, since the microwave sensor has the function of continuous sensing, that is, any movement detected before the delay time elapses will re-start the timer and the light will keep on only if there is human in the detection range.
Need help?
Do you have a question about the LX-MV-400 and is the answer not in the manual?
Questions and answers