Chapter 1
Installing and Configuring the SCXI-1581
Connecting the SCXI-1581 to an E Series DAQ Device for Multiplexed
Scanning in an SCXI Chassis
SCXI-1581 User Manual
3
3
1 SCXI Chassis Power Switch
2 SCXI Chassis Slots
Figure 1-1. Installing the SCXI-1581 Module
To complete the SCXI-1581 installation, follow the steps in the appropriate
sections that follow.
In this configuration, you can multiplex the input channels of the
analog-input SCXI modules into a single channel of the E Series DAQ
device. You need the following items for this installation:
•
SCXI chassis with the SCXI module(s) installed
•
SCXI cable assembly, which consists of a cable adapter and a cable
•
An installed E Series DAQ device
•
1/4 in. flathead screwdriver
1-4
1
®
5
4
3
2
1
2
3 SCXI Module Thumbscrews
ni.com