Parts Identification - Panasonic ES8109S Operating Instructions Manual

Parts identification

 
CLEAN
DRY
CHARGE

STATUS
















 Protective cap
 Foil frame
3 System outer foil
4 System outer foil release
buttons
5 Inner blades
6 Foil frame release buttons
4
SELECT








7 Finger rest
8 Pivot action selector
9 OFF/ON switch
 LCD panel
 Appliance socket
 Trimmer
 Trimmer handle
 Adaptor (RE7-40)
 Power cord
 Appliance plug
 Self-cleaning recharger
(Referred to as the
"Recharger".)
 Detergent cartridge
 Water tank
 Socket
Operating environment for the self-cleaning
recharger
Operating temperature: 15-35 °C (59-95 °F)
Operating humidity: Less than 95%
If you use the self-cleaning recharger in temperatures outside the
•
above range, the following problems may occur.
The time it takes to charge the shaver increases.
-
The recharger stops functioning.
-
The lifespan of the rechargeable battery shortens. (Only when
-
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
If the indicators on the LCD panel do not glow, wait for a short
•
while until it glows.
Depending on the environment, the shaver may not dry even if
•
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
 Water tank cap
 Clean lamp
 Dry lamp
 Charge lamp
 Status lamp
 Select button
 Cleaning tray
 Water level