Digital Loggers Ethernet Power Controller 5 User Manual page 7

Network Con guration
WiFi and HTTPS are disabled by default. Establish a satisfactory
hard-wired network connection to 192.168.0.100 fi rst, then enable
other desired features. The Settings page controls network
confi guration:
The IP address of the controller needs to match the "class C" of
your system. In other words, the fi rst three bytes (192.168.0) must
match the IP on your computer to access the controller. Using a
Ping utility is a good way to confi rm a valid network confi guration.
An "unreachable" report from Ping indicates a misconfi gured
network.
Once you have a connection, the controller may be operated via a
web browser. To access the controller, enter the IP address in the
URL fi eld of your web browser. The default is http://192.168.0.100
After setup, the HTTP and SSH ports may be moved to improve
security. For example, changing the HTTP port to 199 requires a
browser URL of 192.168.0.100:199 to reach the power controller.
Ethernet Power Controller 5 7