Power Trim And Tilt Switch On Digital Electronic Control; Power Trim And Tilt Switch On Bottom Engine Cowling - Yamaha F300 Owner's Manual

Components
Triple type
EMU35152
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the
outboard motor angle in relation to the tran-
som. Pressing the switch "
outboard motor up, and then tilts it up. Press-
ing the switch " " (down) tilts the outboard
motor down and trims it down. When the
switch is released, the outboard motor will
stop in its current position. For instructions
on using the power trim and tilt switch, see
pages 77 and 79.
UP
DN
38
ZMU05988
EMU26153
Power trim and tilt switch on bottom
engine cowling
The power trim and tilt switch is located on
the side of the bottom engine cowling. Press-
ing the switch "
" (up) trims the
motor up, and then tilts it up. Pressing the
switch "
down and trims it down. When the switch is
released, the outboard motor will stop in its
current position.
For instructions on using the power trim and
tilt switch, see page 79.
EWM01030
Use the power trim and tilt switch located
on the bottom engine cowling only when
the boat is at a complete stop with the en-
gine off. Attempting to use this switch
while the boat is moving could increase
the risk of falling overboard and could
distract the operator, increasing the risk
of collision with another boat or an obsta-
ZMU06234
cle.
UP
DN
" (up) trims the outboard
" (down) tilts the outboard motor
WARNING
ZMU05822