Disassembly
・Lead-free solder is used for this product.
・For soldering work, the special solder and soldering iron are required.
・Do NOT mix up lead-free solder with traditional solder.
・Use the special soldering iron respectively for lead-free solder and lead solder.
They cannot be used in common.
Note : ① Be sure to remove the SD memory card and batteries before disassembly.
② When disassembling, make sure to memorize the processing state of wires,
③ Because electrical parts are easily damaged by static electricity, make sure
�
�����������������������������������������������������������������������
��������������������������
������������������������������������������������������������������
��������������������������������������������������
screws to be fixed and their types, etc.
that you are well earthed/grounded.
- D1・ E4100 -
�������
VAA30001-R.3636.A