Nikon Coolpix 4100 Repair Manual page 33

CCD / TB1-PCB / CP1-PCB
・Arrange the shield tape ( ① ), spacer ( ② ), and lens mount ( ③ ). Assemble the CCD ( ④ ) and solder the
CP1-PCB.
・Solder the lead wires (gray: ⑤ and white: ⑥ ).
・Assemble the spacer ( ⑦ ), LPF( ⑧ ), and spacer ( ⑨ ) into the lens assembly.
・Attach the CP1-PCB to the lens assembly, and tighten the 2 screws ( ⑩ : M1.7 × 6).
・Connect the FPC ( ⑪ ).
・Tighten the screw ( ⑫ : M1.7 × 3).
・Place the lead wires in position as shown below, and attach TB1-PCB.
・Attach the holder AF( ⑬ ).
・Tighten the screw ( ⑭ : M1.7 × 3).
・Attach the spacer LCD flex ( ⑮ ).
⑭
TB1-PCB
⑤⑥
�
⑪
�
CP1-PCB
⑮
⑬
③
④
⑨
⑧
⑦
Lens assembly
⑥
⑤
- A12 ･ E4100 -
②
����
�
⑫
①
Direction for assembling
LPF ( ⑧ )
Lens
unit-side
VAA30001-R.3636.A
�
�����
CCD-
side
⑩