3rd lens unit
3rd lens unit
Turning stopper
・While turning the focus motor shaft clockwise with a flathead screwdriver, assemble the 3rd lens unit and the
turning stopper into the CCD base.
・Turn the focus motor shaft further until the 3rd lens unit slightly touches the bottom, then give it about one turn
counterclockwise.
Adhesive: Screw lock
(Colorless)
HH201002
・Hook the 3rd lens spring.
・Apply the Screw lock (colorless) on both hooking ends of the 3rd lens spring.
3rd lens spring
- A5・ E4100 -
Focus motor
VAA30001-R.3636.A