Disconnecting - Epson EasyMP EMP-1815 Quick Connection Manual

Stop/Show/Pause
(When connected to the projector)
Project a PowerPoint slide show
only (Presentation Mode)
Troubleshooting
When the target projector is not found
Check that the projector's power supply is on and that the EasyMP screen is
displayed. It is also possible that the electromagnetic waves of the wireless LAN
are too weak to reach. Check that the projector is not too far away.
When there are too many projectors displayed
You can narrow the search by performing the following operation.
(1) Click "Manual search".
(2) Enter the ESSID for the target projector and click the "Enter" button.

Disconnecting

Procedure
Disconnect the projector from the computer.
Click "Disconnect" on the tool bar.
Disconnect the computer from the projector.
1
Press the [Return] button on the remote
control.
The close menu is displayed.
2
Select "Close" and press the [Enter] button on the remote control.
12
Projector control
Set options
Multi-screen display Preview
Movie Sending Mode
Disconnect