Epson EasyMP EMP-1815 Quick Connection Manual page 8

5
Select "Basic" and set "Projector name"
and "Projector keyword".
See the following table for an explanation of
the items.
6
Select "Wireless LAN" and set "ESSID"
In the case of a wired LAN, select "Wired LAN"
and set the required items.
See the following table for an explanation of
the items.
7
Select "ESC" and press the [Enter] button on the remote control.
8
Select the "Setup complete" menu and press the [Enter] button on the
remote control.
9
Select "Yes" and press the [Enter] button on the remote control.
Network setting "Basic" screen
Item
Projector name
PJLink Password
Web Control Password
Projector keyword
8
The name of the projector. The name set here is displayed
in the projector list when connected.
EMPxxxxxx (xxxxxx is a specific number) is displayed.
Change it to an easy-to-remember name.
Enter alphanumeric characters.
Enter example: EPSON001
Not necessary to set.
Not necessary to set.
When set to "ON", a keyword must be entered when
connecting to the network. This can prevent computers from
making unscheduled connections and interrupting
presentations.
Usually this should be set to "ON".
Network setting screen
Network setting screen
Explanation