Wheels And Tyres - BMW iX Owner's Handbook Manual

Wheels and tyres

Vehicle equipment
This chapter describes equipment, systems and
functions which are offered or will be offered on
a model-specific basis, even if they are not inclu‐
ded in the vehicle in question.
For further information:
Vehicle equipment, see page 7.
Tyre inflation pressure
General
The tyre condition and tyre inflation pressure in‐
fluence the following:
▷ Tyre service life.
▷ Driving safety.
▷ Driving comfort.
▷ Energy consumption.
Safety note
WARNING
A tyre with too little or no tyre inflation pressure
can heat up significantly and sustain damage.
Handling characteristics, for example steering
and braking, will be impaired as a result. There
is a risk of accident. Check the tyre inflation
pressure regularly and adjust as necessary, for
example twice a month or before any long jour‐
ney.
Online Edition for Part no. 01405A38CB9 - VI/21
Wheels and tyres
Tyre inflation pressure information
On the body pillar
The tyre inflation pressure information is located
on the body pillar of the driver's door.
The tyre pressure applies to all tyre sizes and
recommended tyre makes that have been rated
by the vehicle manufacturer as suitable for the
vehicle type concerned. The list can also include
tyre sizes that are only suitable in combination
with specific equipment.
Information about approved wheels and tyres for
the vehicle can be requested from one of the
manufacturer's Service Partners or another quali‐
fied Service Partner or specialist workshop.
The tyre inflation pressure appropriate for the re‐
spective load conditions should be used. For ex‐
ample, if the vehicle is partially loaded, use the
tyre inflation pressure specified for a partially loa‐
ded vehicle.
For Australia/New Zealand
WARNING
The inflation pressures on the tyre label are ap‐
plicable only for tyres explicitly mentioned on
the label. Inflation pressures for tyres that may
be covered by the label – by size, speed cate‐
gory and load rating/load index – but not explic‐
itly mentioned on the label may be different.
Please obtain adequate inflation pressures in
MOBILITY
333