Table of Contents
Advertisement
CONTROLS
▷
Gaseous pollutants are filtered.
▷
Microbial particles and allergens are filtered.
Pre-conditioning
Principle
Pre-conditioning cools or heats the vehicle inte‐
rior to a comfortable temperature prior to starting
the journey depending on the inside and outside
temperature. Any snow and ice can be removed
more easily.
General
The pre-conditioning can be switched on and off
directly or for a preselected departure time.
Depending on the equipment, the following air
conditioning functions are controlled automati‐
cally:
▷
Seat and armrest heating.
▷
Panel heating.
▷
Active seat ventilation.
▷
Steering wheel heating.
▷
Rear window heating.
▷
Mirror heating.
The air automatically flows out of the air vents to
the windscreen, side windows, upper body area
and the footwell.
The system shuts down automatically after ap‐
proximately 30 minutes or by activating the drive-
ready state.
Using the pre-conditioning while the vehicle is
being charged will reduce air conditioning de‐
mand during the journey. This helps to optimise
the range.
To ensure the vehicle can achieve a minimum
range, the pre-conditioning may be switched off
automatically, for example after switching on sev‐
eral times or due to the high-voltage battery be‐
ing insufficiently charged. After turning off due to
an insufficient state of charge, charge the high-
290
Air conditioning
Online Edition for Part no. 01405A38CB9 - VI/21
voltage battery. The pre-conditioning is then
available again.
Operating requirements
▷
The vehicle is in rest state or standby state.
▷
The high-voltage battery is sufficiently
charged or a charging cable is connected.
If the high-voltage battery is heavily dis‐
charged, it may take some time after con‐
necting the charging cable before the pre-
conditioning is ready to function.
▷
Time and date are set correctly.
▷
The air vents of the ventilation are open.
Turning on/turning off the pre-
conditioning
Turning on/turning off via iDrive
1.
"CLIMATE MENU"
2.
"Settings"
3.
"Pre-conditioning"
4.
Select the desired setting.
Turning on via vehicle key
The system can be switched on using the vehi‐
cle key.
The pre-conditioning function must be set up on
the button on the vehicle key.
Press the button on the vehicle key.
Setting:
1.
"MENU"
2.
"Vehicle apps"
3.
"Doors and windows"
4.
"Vehicle key"
5.
Select the desired setting.
Advertisement
Table of Contents
