Fixtures For Lower Isofix Anchors; Fitting Isofix Child Restraint Systems; I-Size Child Restraint Systems - BMW iX Owner's Handbook Manual

Suitable ISOFIX child restraint
systems
Only certain ISOFIX child restraint systems are
permitted to be used on the designated seats.
The associated size class and size category are
denoted by a letter or ISO reference on a plate
on the child seat.
For further information:
Suitable seats for child restraint systems, see
page 131.

Fixtures for lower ISOFIX anchors

General
Observe the following when attaching child re‐
straint systems with an integrated strap to the
lower ISOFIX anchors:
The total weight of the child and child restraint
system must not exceed 33 kg, 73 lbs.
Safety notes
WARNING
If the ISOFIX child restraint systems are not en‐
gaged correctly, the protective effect of the
ISOFIX child restraint systems will be limited.
There is a risk of injury or even death. Make
sure the lower anchor point has engaged cor‐
rectly and the ISOFIX child restraint system
rests firmly against the backrest.
WARNING
The attachment points for child restraint sys‐
tems in the vehicle are intended for attaching
child restraint systems only. The attachment
points can be damaged if other objects are at‐
tached. There is a danger of injury or material
damage. Only attach child restraint systems to
the corresponding attachment points.
Carrying children safely
Online Edition for Part no. 01405A38CB9 - VI/21
Position
Icon Meaning
The corresponding icon shows
the fixtures for the lower ISOFIX
anchors.
The fixtures for the lower ISOFIX anchors are lo‐
cated behind the marked covers.
Depending on the equipment: to expose the
mountings, open the flaps to the top or pull the
cover up on the loop.
Before fitting ISOFIX child restraint
systems
Pull the seat belt away from the area of the child
seat mountings.

Fitting ISOFIX child restraint systems

1. Install child restraint system, see the manu‐
facturer's instructions.
2. Make sure that both ISOFIX anchors are en‐
gaged correctly.

i-Size child restraint systems

General
i-Size is a regulation for child restraint systems,
which is used for the approval of child restraint
systems.
CONTROLS
129