Advertisement
确定所有衔接螺母都已锁紧遥 开启
主水源袁检查是否有漏水遥 如有漏
水袁修理之遥
按住花洒托架的簧片上下滑动袁可
调节托架位置遥
适用于所有加工处理过的表面院以
中性肥皂水清洗镀层表面袁再以干
净的软布彻底擦干整个表面遥 许多
清洁剂袁比如氨水尧去污粉及洁厕灵
等袁会对电镀表面造成伤害袁切忌使
用遥
有磨损性的清洁用具或清洁剂也
不可使用于科勒牌的水龙头及其
配件上遥
1140680-2/Rev00
Ensure that all coupling nuts are tightened.
Turn on the main water supply, and check for
leaks. Repair as needed.
The height of handshower holder can be
adjusted by pressing the pinch cock and
sliding up and down.
簧片
Pinch cock
All Finishes: Clean the finish with mild soap
and warm water. Wipe entire surface
completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as
ammonia, chlorine, toilet cleaner etc. which
could adversely affect the finish and are not
recommended for cleaning.
Do not use abrasive cleaners or solvents
on Kohler faucets and fittings.
Advertisement
