How To Use; Start Cooking; If The Display Flashes - Scandomestic K 52 User Manual

Always lift pans off the Induction hob – do not slide, or they may scratch the glass.

3.3 How to use

3.3.1 Start cooking

Touch the ON/OFF control for three seconds. After power on,
the buzzer beeps once, all displays show ―–‖ or ―– –‖, indicating
that the induction hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control ,and the indicator
next to the key will flash
Select a heat setting by touching the ―-‖ or ―+‖ control.
• If you don't choose a heat setting within 1 minute, the
Induction hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.

If the display flashes

This means that:
• you have not placed a pan on the correct cooking zone or,
alternately with the heat setting