Page 3
- Input Power : 8VDC ~ 24VDC - Consumption Power : 12Watt, Max 4. Switch Input mode - Possible to select CAR model while switching mode by DIP S/W - By button on the Commander in the car via CAN GU Electronic...
2. Block Diagram INTERFACE COMMAND EEPROM SYSTEM RECEIVER LVDS LVDS NAVIGATION LVDS Scaler SYSTEM (PIP) FRONT CAMERA COMPOSITE REAR CAMERA REAR CAMERA POWER BOARD RELAY TFT-LCD GU Electronic...
Page 5
3. Dimension 159mm * 83mm * 22mm 159mm 22mm 83mm * This can change under manufacturer’s circumstance GU Electronic...
⑦ DVD IR (Orange) 7. N.C 15. GND (Black) 8. N.C 16. GND (Black) *Touch Connect * Rear-power & Front-power -> Output Current = Max 200mA ① ② ③ ④ ① Y- ② X- ③ Y+ ④ X+ GU Electronic...
6. Product Composition SUB Board 1 EA Interface 1 EA LVDS Cable(800mm) 1 EA RGB Navi Cable 1 EA FFC(100mm) 1 EA Power Cable 1 EA Touch convertor Cable(KD-900) 1 EA OSD Board 1 EA GU Electronic...
Page 10
6. Product Composition * CarPlay Set Sales(option) – KPLAY AUX Cable 1 EA Interface 1 EA Power Cable 1 EA HDMI Cable 1 EA Bluetooth / Wifi Antenna 2EA Microphone 1 EA GU Electronic...
Page 11
6. Product Composition * CarPlay(NV17) Set Sales(option) AUX Cable 1 EA CarPlay Main 1 EA Power Cable 1 EA HDMI Cable 1 EA Microphone 1 EA GU Electronic...
7” (2014) Capacitive-touch CAR type SEL Right Picture Jauar XF2.2 DL 7” (2014) Capacitive-touch Landrover Land Rover Discovery4 3.0D SE 7” (2013) Landrover Range Rover 8” Discovery Sports 2.0D SE 8” (2015) Landrover Discovery4 3.0 SDV6 SE 7” (2015) GU Electronic...
Touch control - Calibration Press and hold for more than 11 seconds on NAVI, DVB-T, DVD screen. (Note that it only works the first time after switching screens) + Touch according to the shape coordinates. OSD menu -> Utility -> Calibration GU Electronic...
Page 18
9. Touch Control DVB-T/DVD Control DVB-T Press Icon GU Electronic...
Page 19
Press to display when there is no OSD screen. When OSD screen is on, press it to EXIT or OFF. Item Selection, Value Selection Item up Increase selected value DOWN Item down Decrease selected value Mode State First Menu Second Menu Third Menu GU Electronic...
Page 20
NAVI-RGB Setting the Connected NAVI Model ELT_DVBT20 DVB-T(DMB) Setting the Connected DVB-T Model ELT_980XU Slim Config Setting the Connected DVD Model AVM VIDEO RearCam Setting the Connected RearCam Model Reset Execute Reset to default value of Config menu GU Electronic...
Page 21
UI DVB-T (DMB) Disable feature DVD device control UI output function UI DVD Disable feature Set up manufacturer of FINE woodworking device for UART NAVI COM Touch use Do not use features. Reset Execute Option Menu all Reset GU Electronic...
Page 22
10. OSD(On Screen Display) Control OSD Option -> FrontCam-RcvOpt Front Camera Auto Mode 0 second = FrontCam-RcvOpt menu OFF 1~30 second = FrontCam-RcvOpt menu ON & time control NAVI NAVI REAR FRONT AV1(DVB-T) AV1(DVB-T) AV2(DVD) AV2(DVD) Select time of display 1~30 second GU Electronic...
Page 23
Adjust the value of contrast Saturation Adjust the value of Saturation Image Adjust the value of Hue Sharpness Adjust the value of Sharpness Reset Excute Option Menu all Reset << Brightness >> << Contrast >> << Saturation >> GU Electronic...
Page 24
Output screen horizontal Horizontal movement Output screen vertical Vertical movement Scale X Up Reduce / increase output screen width Screen Scale X Down Scale Y Up Reduce / Increase Output Screen Height Scale Y Down Reset Screen menu all reset GU Electronic...
Page 25
Show parking line Line Display Do not show parking lines Warnings Lang Set warning text language Parking Moving a parking line Horizontal horizontally Vertical Moving a parking line vertically Transparency Parking line transparency Reset Parking menu all reset GU Electronic...
Page 26
10. OSD(On Screen Display) Control OSD Parking – OPS Display On / Off OPS ON Screen OPS OFF Screen OSD Parking – Guide line On / Off Parking Line ON Screen Parking Line OFF Screen GU Electronic...
Page 27
10. OSD(On Screen Display) Control OSD Parking – Change warning language GU Electronic...
Page 28
Keypad in Horizontal / Vertical menu ※ Pressing this Horizontal / Vertical menu, The OSD screen automatically disappears. Please adjust from the parking line Screen. MENU DOWN Press “UP” button Press “MENU” button Press “SEL” button Press “DOWN” button GU Electronic...
Page 29
Third Menu Description Horizontal value OSD Menu Horizontal Shift value Vertical OSD menu vertical Shift OSD Menu Display Time (in value Display Time seconds) value Transparency OSD menu transparency Language OSD menu display language Reset Execute Initialize OSD settings GU Electronic...
Page 30
3. Before using IR learning function, select All-Clear to delete existing stored data. 4. Press the remote control button to be used in each ICON once in New Code, press once again in Cfm Code to confirm it is the same and save it. GU Electronic...
Page 31
(Check for future upgrades) Last Source : FDSYOOKRX-180209 Software Version Software Month Software Year Special Version National : CN=CHINA, KR=KOREA, JP=JAPAN, US=United States Hardware Version PIP model : S3=Sync3, PP=PIP, LV=LVDS Motor model : FD=FORD, BM=BMW, BE=BENZ, MA=MASERATI, LX:LEXUS GU Electronic...
Page 32
11. Install Manual 1. Installation Navigation Connection *Analog RGBsync navigation DVD-IR DVBT-IR SYNC Analog RGB BLUE GREEN Resistive Touch KD-900 *Digital navigation Roik, Qroi • Select the navigation you want to use from the above items. GU Electronic...
Page 33
11. Install Manual 2. Installation DVB-T Remote Control Connection ① or ② 선택1 DVD IR DVB-T IR SYNC BLUE GREEN 선택2 DVB-T-IR • Select the DVB-T you want to use from the above items. GU Electronic...
Page 34
11. Install Manual 3. Installation DVD Remote Control Connection DVD IR DVB-T IR SYNC BLUE GREEN DHA-S690 DVD-IR • Select the DVD you want to use from the above items. GU Electronic...
Page 35
FRONT Detect (Blue) ON / OFF • Refer to page. 10. OSD (On Screen Display) Control -> OSD option -> FrontCam-RcvOpt. • When AV mode is activated, the Front camera can be viewed using the Mode change button.. GU Electronic...
Page 36
11. Install Manual 5. Installation External Reverse(Rear) Camera Connection REAR-POWER (Red) REAR Power (Red) FRONT Detect (Brown) +12V • Select the RearCam you want to use from the above items. GU Electronic...
Page 37
11. Install Manual 6. Installation CarPlay - KPLAY * When installing CarPlay, set it to OSD MENU-OPTION-NAV COM-KPLAY. Iphone Microphone 3.5pie aux cable Screen GU Electronic...
Page 38
11. Install Manual 7. Installation CarPlay – NV17 * When installing CarPlay, set it to OSD MENU-OPTION-NAV COM-NV17. 3.5pie aux cable Iphone Screen Screen Microphone Screen GU Electronic...
Page 39
11. Install Manual 8. Installation HDMI-TO-DIGITAL Connection • Select the navigation you want to use from the above items. GU Electronic...
Page 46
2. LVDS cable must be connected correctly according to the manual 3. Insulate the end of wire by using electrical tape 4. The installation should be done by expert 5. GU electronic does not take any responsibility for any problem caused by wrong installation GU Electronic...
Need help?
Do you have a question about the HW Ver7.1 and is the answer not in the manual?
Questions and answers