Advertisement
Main-level Screens
Input Setup
I n p u t S e t u p . . .
Press the ENT key to bring up the second-level ASI Input 1 screen.
Press the 4
4 key to go to Program Status.
Press the 3
3 key to go to Clear Errored Seconds (if counter is non-zero) or
Alarms/Warnings.
Press the ESC key to go to the Home Screen.
Program Status
P r o g r a m S t a t u s . . .
Press the ENT key to view the second-level program status screens.
Press the 4
4 key to go to Front Panel Timeout.
Press the 3
3 key to go to Input Setup.
Press the ESC key to go to the Home Screen.
Front Panel Timeout
F r o n t P a n e l T i m e o u t
1 0
Press the ENT key and then the 5
timeout (No Timeout, or 3, 5, 10, 30, or 60 seconds). Press the ENT key to
confirm the selection or ESC to cancel.
Press the 4
4 key to go to IP Setup.
Press the 3
3 key to go to Program Status.
Press the ESC key to go to the Home Screen.
800043-02 Rev. A
5 or 6
6 key to select the front-panel help
ASI Input 1
A S I I n p u t 1
Press ENT and use the 5
5 or 6
disabling this input. Press ENT again to confirm.
Press the 4
4 key to go to the ASI Input 2 Screen.
Press the ESC key to return to the main-level Input Setup screen.
ASI Input 2
A S I I n p u t 2
Functions for ASI Input 2 Screen are identical to those for ASI Input 1.
Press the 4
4 key to go to the RF Input 1 screen.
Press the 3
3 key to go to the ASI Input 1 screen.
Press the ESC key to return to the main-level Input Setup screen.
RF Input 1
R F I n p u t 1
Press ENT to go to the third-level Tuner Enable, Channel Number, and RF
Standard Screens.
Press the 3
3 key to go to the ASI Input 2 screen.
Press the ESC key to return to the main-level Input Setup screen.
RF Input 2
R F I n p u t 2
Functions for RF Input 2 Screen are identical to those for RF Input 1.
Press the 3
3 key to go to the RF Input 1 screen.
Press the ESC key to return to the main-level Input Setup screen.
nd
2
-level Program Status
P r o g I n X X X X X A A A A A A A
P r o g O u t Y Y Y Y
where XXXXX is the program number at input, AAAAAAA is the service
descriptor for the program, YYYY is the hexadecimal program number at output,
and BBB is the available audio for the program (AC-3, MPEG, or MPG/AC-3).
Press the 4
4 key to view the status of the next program (all programs may be
viewed though only programs 1 through 16 may be used.
Press the ESC key to return to the main-level Program Status screen.
Page 4 of 6
Second-level Screens
6 keys to select <ON> or <OFF>, enabling or
B B B
July 21, 2004
Advertisement
