Advertisement
Quick Links
Eden - TV Unit
Assembly Instructions -
Dimensions
Width - 119.5cm
Depth - 38.5cm
Height - 47cm
Important -
Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Please keep for future reference
397/6540
399/9204
MADE IN
BRITAIN
Issue 2 - 01/06/15
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Argos Eden 397/6540
Summary of Contents for Argos Eden 397/6540
- Page 1 Eden - TV Unit Assembly Instructions - 397/6540 Please keep for future reference 399/9204 Dimensions Width - 119.5cm Depth - 38.5cm MADE IN Height - 47cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 Issue 2 - 01/06/15...
-
Page 2: Care And Maintenance
Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 17kgs. space to layout the parts before recommend the Please lift with care. starting. - Page 3 If you have damaged or missing components, call the Components - Panels Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the panels listed below Left End Right End Divider (DF3439) (DF3440) (DF1190) (396 x 375mm) (396 x 375mm) (331 x 363mm) (DF3441)
- Page 4 If you have damaged or missing components, call the Components - Fittings Customer Helpline: 03456 400800 quoting the reference numbers below Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.
- Page 5 If you have damaged or missing components, call the Assembly Instructions Customer Helpline: 03456 400800 quoting the reference numbers below Step 1 Prepare the base Push 4 hollow core locking nuts into the base , making sure that they are flush against the panel’s surface.
- Page 6 Assembly Instructions Step 2 Prepare the left end Push 2 hollow core locking nuts into the left end , making sure that they are flush against the panel’s surface. Using a hammer, tap in the pin on the hollow core locking nut Screw 2 small metal dowels into the left...
- Page 7 Assembly Instructions Step 4 Top edge Prepare the divider Push 2 shelf studs into the divider Turn the divider over Push 4 hollow core locking nuts into the divider , making sure Turn the divider over that they are flush against the panel’s surface.
- Page 8 Assembly Instructions Step 6 Prepare the top Screw 6 small metal dowels into the top Step 7 Fit the top Push the top onto the left side and divider The 4 small metal dowels fitted to the top must slide into the top of the 4 hollow core locking nuts fitted to the left...
- Page 9 Assembly Instructions Step 9 Prepare the right end Push 2 hollow core locking nuts into the right end , making sure that they are flush against the panel’s surface. Using a hammer, tap in the pin on the hollow core locking nut Screw 2 small metal dowels into the right...
- Page 10 Assembly Instructions Step 11 Fit the right end Push the right end onto the top , base and back Insert a screwdriver into the 2 hollow core locking nuts on the right end and turn the nuts inside as far as they will Step 12 Secure the right end to the base...
- Page 11 Assembly Instructions Step 13 Fit the shelf Carefully stand the uit upright again and lower the shelf down onto the 4 shelf studs Tighten the screws in the shelf studs up into the shelf Step 14 Fit the door stop Push the door stop into the base Step 15...
- Page 12 Assembly Instructions Step 16 Fit the door Note: The easiest way to attach the door is to fit the top hinge first, then align and fit the other hinge. Push the hinge onto the front part of the hinge plate The recess at the bottom of screw B goes into the slot in the hinge plate.
- Page 13 Assembly Instructions Step 17 Fit the handle Attach the handle the door using 2 screws...
- Page 14 Assembly Instructions Step 18 Adjust the door if needed Before adjusting the door, use a spirit level to check the top (or base) of the unit is level, front- to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any...
- Page 15 Step 19 Assembly is complete If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800 and quote the reference numbers on the component pages. Argos Ltd, 489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW...
- Page 16 ALR3155...
Need help?
Do you have a question about the Eden 397/6540 and is the answer not in the manual?
Questions and answers