Delayed Sending - Canon FAX-TT250 User Manual

5 Use the numeric buttons to enter the number of times you want the fax to
redial, then press [Start/Copy] twice.
6 Use the numeric buttons to enter the time interval between redialling attempts, then press [Start/Copy].
7 Press [Stop].
The fax returns to standby mode.

Delayed sending

Your fax can send a document automatically at a preset time. This allows you to take advantage of lower late-night
long-distance rates offered by some telephone companies.
The fax can only register one preset sending operation at a time.
1 Load the document face down into the document feeder (see p. 13).
2 Press [Function], then press [Send Options].
3 Use [ ] or [
4 Enter the desired sending time using the numeric buttons, then press [Start/Copy].
• Set the time using the 24-hour clock system. Precede single digits with a zero.
Example: 3:00 p.m. = 15:00
• Press [Clear] if you need to re-enter the time.
5 Enter the receiving party's fax number, then press [Start/Copy].
• The fax scans the document into memory.
• You can enter the receiving party's fax number using the numeric buttons, one-touch speed dialling or coded speed dialling (see
p. 30).
• If you use the numeric buttons, press [Start/Copy] after entering the number to register it.
6 When the set time comes, the fax dials and sends the document.
You can change the desired sending time and the receiving party's fax number after setting them.
32
] to select <DELAYED TX>, then press [Start/Copy].
2MIN.
SET TIME 15:00