Setting The Receive Mode; Receiving Both Documents And Telephone Calls Automatically: <Fax/Tel Mode - Canon FAX-TT250 User Manual

Setting the receive mode

1 Press [Receive Mode], then press [Stop] to return to standby mode.
Every time you press [Receive Mode], the mode changes cyclically.
Receiving both documents and telephone calls
automatically: <Fax/Tel mode>
If you set <Fax/Tel> mode, you can control precisely how the fax handles incoming calls by adjusting the following
settings:
• Adjust the time the fax takes to check whether a call is from a fax machine or a telephone (<RING START TIME>
setting).
• Adjust the length of time the fax rings when the call is a voice call (<F/T RING TIME> setting).
• Set whether the fax switches to receive mode after the ring time set in <F/T RING TIME> has elapsed
(<DEFAULT ACTION> setting).
1 Press [Function], then press [Start/Copy].
2 Use [ ] or [ ] to select <RX SETTINGS>, then press [Start/Copy].
3 Use [ ] or [ ] to select <FAX/TEL AUTO SW>, then press [Start/Copy] twice.
4 Use the numeric buttons to enter the time the fax waits before ringing when
it receives a call, then press [Start/Copy] twice.
5 Use the numeric buttons to enter the time the fax rings while waiting for
someone to pick up the handset, then press [Start/Copy] twice.
6 Use [ ] or [ ] to select <RECEIVE> or <DISCONNECT>, then press [Start/Copy].
This setting tells the fax what to do if the handset is not picked up within the specified ring time set in step 5.
7 Press [Stop].
Setting ends and the fax returns to standby mode.
6
8SEC
22SEC
DISCONNECT
37