Install The Faucet - Kohler Avid T97367-4-BN Installation Manual

Plug

6. Install the Faucet

NOTICE: Keep the faucet vertical during installation to avoid
damaging the faucet O-rings.
Make sure that the water is turned OFF.
Carefully relieve the water pressure.
Remove the plug(s) from the base.
Remove the rubber protector (not shown) from the faucet.
Verify that the base is completely free of dirt and debris.
Position the faucet on the base, and insert the screws and washers
(provided) through the flange.
Tighten the screws using the hex wrench provided.
Slide the escutcheon down onto the floor to cover the base.
Kohler Co.
Base
Hex
Wrench
9
Escutcheon
Screw
Washer
Flange
1389240-2-A