6. Install the Faucet
NOTE: Keep the faucet vertical during installation to avoid damaging the faucet O-
rings.
Verify that the water is turned OFF.
Carefully relieve the water pressure.
Remove the plug from the base.
Remove the rubber protector (not shown) from the faucet.
Verify that the base is completely free of dirt and debris.
Secure the faucet to the base with the screws and washers (provided). Tighten the
screws using the hex wrench provided.
Slide the escutcheon down onto the floor to cover the base.
1443292-2-B
Plug
10
Escutcheon
Kohler Co.