PRODUCT INFORMATION
Fixture*:
Lavatory
Outlet
1-11/16" D.
* Approximate measurements for comparison only.
BEFORE YOU BEGIN
NOTES
S
These instructions contain important care, cleaning,
and warranty information – please leave instructions
for the consumer.
S
Due to the nature of the installation, undercounter
lavatories should be installed by trained and
experienced installers.
S
Prior to installation, unpack the new lavatory and
carefully inspect it for damage. Return the lavatory
to its protective carton until you are ready to install
it.
S
Do not use adhesives or adhesive sealants with this
product.
4"
4"
2"
1-1/2" R.
20"
(S)
(T)
4" 4"
3/8" HOT
1-1/4" OUTLET
1.05>116
CB
114409-2-
R
basin area
water depth
16" x 12"
5"
6-1/8"
18"
3/8"
8-1/2"
3/8" COLD
ENAMELED CAST IRON
UNDERCOUNTER LAVATORY
TOOLS AND MATERIALS REQUIRED
S
Safety glasses
S
Safety shoes
S
Pencil
S
Scissors
S
Tape measure
S
Putty knife
S
Sealant
S
Screwdriver
S
Hole saw
S
Keyhole saw or saber saw
S
Drill (1/2" dia. drill bit or larger)
Roughing-In Notes
Fixture dimensions are nominal and conform to tolerances
in ASME/ANSI Standard A112.19.1M.
( T ) Pop-up drain 14-1/8", grid drain 13-1/4".
( S ) 10" (Based on 12" riser which may require cutting).
Holes in undercounter fixture are oversized. Drill fitting
holes in counter according to fitting rough-in.
SEALANT
3/8" D.
LAVATORY
MARBLE SLAB
INSTALLATION
NOTE: WATERPROOF UNPROTECTED OVERHANG
AREA ON THE UNDERSIDE OF WOOD COUNTER
1 1
TAHOE
SEALANT
5/8"
LAVATORY
WOOD COUNTER
INSTALLATION
E2000 Kohler Co.