Advertisement
230V 195AMP DUAL MIG195 WELDING WELDER
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 4900 MON-FRI 9AM TO 3PM PST
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 4900 MON-FRI 9AM TO 3PM PST
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
ITEM: 55016
Advertisement
Table of Contents
Related Manuals for Stark 55016
Summary of Contents for Stark 55016
- Page 1 230V 195AMP DUAL MIG195 WELDING WELDER ITEM: 55016 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
- Page 2 IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
- Page 3 IMPORTANT SAFETY INFORMATION Keep head out of fumes. DO NOT breathe exhaust fumes Use enough ventilation, exhaust at arc, or both, to keep fumes and gases from breathing zone and general area. If engineering controls are not feasible, use an approved respirator. Always check to see that keys and adjusting wrenches are removed from power tool before turning on.
- Page 4 Have your welder serviced by a qualified repair person using only identical replacement parts. Maintain labels and nameplates on the Welder. These carry important information. If unreadable or missing, contact Stark Tools for a replacement. Unplug the Welder from its electrical outlet before any inspection, maintenance, or cleaning procedures.
- Page 5 SPECIFICATIONS AND IMPORTANT INFORMATION 1. ON/OFF SWITCH 2. OUTPUT SETTINGS 3. AMP SELECTOR 4. EARTH CLAMP 5. TORCH FEATURES CONTENTS SPECIFICATIONS Variable Feed Speed 1X welder machine Input voltage: 230V/60Hz AC, single Control phase 1X welding gun Torch With Full On / Off Welding current: 60 to 190 amps Safety Control 1X Welding Wire...
- Page 6 OPERATION ELECTRICAL SAFETY INFORMATION The wires in this product are color coded: BLUE: Neutral (N) BROWN: Live (L) GREEN/YELLOW: Earth (E) As the colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black, the wire which is coloured brown must be connected to the terminal which is marked L or coloured red.
- Page 7 TROUBLESHOOTING...
- Page 8 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 55016 and is the answer not in the manual?
Questions and answers