Stark PRO MIG 130 Owner's Manual And Safety Instructions
  1. Manuals
  2. Brands
  3. Stark Manuals
  4. Welding System
  5. PRO MIG 130
  6. Owner's manual and safety instructions

Stark PRO MIG 130 Owner's Manual And Safety Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

PRO SERIES AUTO FEED MIG 130 WELDING WELDER 110/220V
ITEM: 55019
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 4900 MON-FRI 9AM TO 3PM PST

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO MIG 130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stark PRO MIG 130

Summary of Contents for Stark PRO MIG 130

  • Page 1 PRO SERIES AUTO FEED MIG 130 WELDING WELDER 110/220V ITEM: 55019 OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).

  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. SAFETY The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur.
  • Page 3 IMPORTANT SAFETY INFORMATION Keep head out of fumes. DO NOT breathe exhaust fumes Use enough ventilation, exhaust at arc, or both, to keep fumes and gases from breathing zone and general area. If engineering controls are not feasible, use an approved respirator. Work in a confined area only if it is well-ventilated, or while wearing an air-supplied respirator Have a recognized specialist in industrial Hygiene or Environmental Services check the operation and air quality and make recommendations for the specific welding situation.
  • Page 4 Have your welder serviced by a qualified repair person using only identical replacement parts. Maintain labels and nameplates on the Welder. These carry important information. If unreadable or missing, contact Stark Tools for a replacement. Unplug before maintenance. Unplug the Welder from its electrical outlet before any inspection, maintenance, or cleaning procedures.

  • Page 5: Diagrams And Specifications

    DIAGRAMS AND SPECIFICATIONS GROUND MIG TORCH CABLE & SELECTOR WIRE CLAMP BRUSH CHIPPING HAMMER VOLTAGE SPOT KNOB TIMER TENSION POWER WIRE SWITCH WORK INDICATOR WELDING TORCH MASK NEGATIVE POSITIVE TERMINAL TERMINAL SPECIFICATIONS FEATURES Variable Feed Speed Control 1X welder machine Torch With Full On / Off Safety Control 1X welding gun Automatic Thermal Safety Protection...

  • Page 6: Parts And Accessories

    PARTS AND ACCESSORIES...
  • Page 7 PARTS AND ACCESSORIES WARNING! TO PREVENT DEATH FROM APHYXIATION DO NOT open gas without proper ventilation. Fix gas leaks immediately. Shielding gas can displace air and cause rapid loss of consciousness and death. Shielding gas without carbon dioxide can be even more hazardous because asphyxiation can start without feeling shortness of breath.

  • Page 8: Operation

    OPERATION The Mig100 130 welder requires a dedicated 120 AC , 60 Hz power input. Please check carefully the welder you have in hand is 120V before using. If using an extension cord, use a minimum 12 AWG cord for up to 25 feet.
  • Page 9 OPERATION 9. Turn on the machine and set the wire speed. 10. With the gun pointed away from you and others, depress the trigger to begin feeding wire. NOTE: Watch the drive roller to see if any slipping is occurring between the roller and wire, if so, turn the machine off and tighten the Pressure Adjuster turn and test again.
  • Page 10 OPERATION TYPES OF WELD JOINTS...

  • Page 11: Please Read The Following Carefully

    PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

This manual is also suitable for:

55019

Table of Contents

Save PDF