Table of Contents
Advertisement
5.2 Password entry
It is necessary to enter a password to switch to setting mode.
Enter [0000] and switch to password setting mode when you set a password for the first time.
*When you are setting a password, make sure to write it down.
Measuring value display
↓<MODE>
- 1
M
↓<SET>
- 1
M
If the password is wrong, [FAIL] is displayed and the device returns to the password entry window.
*If you enter the wrong password 5 times, you have to wait 1 hour before you can try again.
KW2M-A/X User's Manual
Press <MODE> and it switches to password entry window.
Enter password the from left to right using the keys
P a s s
o r d
w
<ITEM/＞>, <SHIFT/∧>.
<SHIFT/∧>
0 - - -
<ITEM/＞>
Press <SET> after entering the password.
P o
e r
w
If the password is correct, the device switches to the setting
mode for power measurement.
Increases the value
Shifts the entered digit to the right
- 1
M
Settings
P a s s
o r d
w
F a i l
27
Advertisement
Table of Contents
