Disconnecting Your Computer From The Port Replicator - Sony Vaio PCG-FX401 Instruction & Operation Manual

Connecting peripheral devices

Disconnecting your computer from the port replicator

To disconnect your computer from the port replicator, proceed as follows:
1 Turn off the computer and the connected peripherals.
2 Pull the levers on each side of the port replicator (1) to disconnect the computer from the port replicator.
3 Lift the computer away from the port replicator.
4 Close the port replicator connector cover on the bottom of your computer.
✍
It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open, dirt may get
inside and damage the computer.
To disconnect your port replicator completely from the mains voltage, unplug the AC adapter.
n N
63