Disconnecting Your Computer From The Port Replicator - Sony PCG-GRZ615G User Manual

Connecting peripheral devices

Disconnecting your computer from the port replicator

To disconnect your computer from the port replicator, proceed as follows:
1 Stop the connected peripherals.
2 Close the cover and pull the levers on each side of the port replicator to disconnect the computer from
the port replicator.
3 Lift the notebook away from the port replicator.
4 Close the port replicator connector cover on the bottom of your computer.
It is extremely important to close the port replicator connector cover after
removing your computer from the port replicator. If the cover is left open, dust may
get inside and damage the computer.
To disconnect your port replicator completely from the mains voltage, unplug the
AC adapter.
n N
59