Sony Vaio PCG-FX401 Instruction & Operation Manual page 62

Connecting peripheral devices
Attaching your computer to the port replicator
To attach your computer to the port replicator, proceed as follows:
1 Turn off the computer and disconnect all peripherals.
2 On the bottom of the computer, lift the port replicator port cover.
3 Attach the bottom of the computer to the port replicator connector until it clicks.
4 Plug the cable attached to the AC adapter (1) into the DC In (2) connector on the port replicator (3).
5 Plug the power cord (4) into the AC adapter and an AC outlet.
The power indicator light turns green.
n N
61