Download Print this page

Prime Inventions AquaAvanti Inline Manual page 18

Available languages

INSTALLATION OF ADDITIONAL FILTER STAGES

The addtional stage will be connected with two screws beside on the left of the main

filter stage. If you have already installed a main stage please close the water flow at the

T-Adapter (grey lever oblique to water flow direction). Please take off the hose from the

filter head (on left side) of the main stage. It is necessary to push down the small lock ring

to unlock the hose and pull it out at the same time.

Please open carefully the cap of the filter head with a small screw driver

Now you can see the holes for the screws

Shorten the white hose to a proper lenght between the filter stages. We recommend

1,5cm minimum length

Plug in the hose into both filter heads all the way to the stop.

Now you can attach the filter head of the additional stage beside the main stage. We

recommend this chronological order as it is hard to fit in the short hoses when the

filter heads are mounted already.

Now you can close the head by putting on the cap again. Please check of correct

positioning of the pins and press it together. Please plug in the water inlet hose

(which comes from the T-Adatper) into the head of the additional stage. If you need

more stage for anti lime scale for e. g. You can add the other stages in the same way.