Advertisement
Available languages
Available languages
6. PUTTING IN THE CARTRIDGE
1.
On the filter cartridge your can see a white arrow (on manual red) which will help
you on finding the correct position.
2.
Please put in the cartridge oriented by the white arrow to the left (side of water in-
let).
3.
Now you can turn about a 1/4 turn until the end stop. The white arrow should now
be in the middle of the head.
4.
Open the valve at the T-Adapter by putting it in the direction of the water flow. .
5.
Now open the angle valve a little to see if everything is tight and no water is leaking.
6.
Please flush the filter water about 5 min. after the installation in order to get the filter
cartridge ready to work properly.
If you see any leaking water close the angel valve immediately and check the leaking areas
by srew the nuts a little more tight of push in the hose a little more. Please follow this as
long as you can see no more leaking and can open the angle valve completely.
1
4
16
16
!
ATTENTION
2
5
3
Advertisement
