Mounting The Filter Head - Prime Inventions AquaAvanti Inline Manual

3. MOUNTING THE FILTER HEAD

ATTENTION: Please avoid applying excessive force
The filter head should be connected with two screws (not in scope of delivery)
under the sink. A good place is mostly a side wall. Please consider the length of
the hoses for inlet and outlet.
1. Please open carefully the cap on the filter head with a small screwdriver.
2. Now you can see the holes for the screws.
3. The filter head can easily screwed on the side panel.
4. If the head has been fixed you can put on the cap of the head.
5. Bring the cap in postion to fit in the small pins
6. Press the cap on with your hand
1
4
14
14
when attaching/ detaching
the cap of the filterhead.
2
5
!
3
6