Prime Inventions AquaAvanti Inline Manual page 12

1. INSTALLATION KITCHEN
Please do not use the filter unit behind unpressurized boiler!
Do not connect to a shower mixer!
Operate the filter system only with cold water!
1. Close at first the angle valve for cold water under the sink, please.
2. Unscrew the cold water hose which goes from your angle valve to the exiting
faucet. So you see a free 3/8" male thread on the angle valve now.
3. Screw the T-Adapter on the free 3/8" thread of the angle valve. (a suitable wrench
for 3/8" is needed).
4. Please close the valve in the T-Adapter by putting the grey lever oblique to water
flow direction.
5. Now please connect the 3/8" cold water hose of your existing faucet to the T-Ad-
apter.
6. The T-Adapter is ready to use
Attention: The white arrow on the filter housing head shows the water flow direction.
1
4
12
12
2
5
!
3
6