Installation Guide; For Installation Or Dismantling Of The Washer - Whirlpool WDC1070 User Manual

2. Installation Guide

2.1 For installation or dismantling of the
washer
When you encounter difficulties during installation or usage of the washer,
please call Whirlpool local agent to seek advice of arrange for maintenance
or repairs.
This washer requires two or more persons to carry and install. Not
following this instruction may cause spinal or other serious injuries.
WARNING
Risk of injury during installation
1. Remove all accompanying items from the
washer drum:

User guide

Rubber water hose

bolt hole cover

hex wrench (for removing bolt hole
cover and adjusting feet of the
washer )

washing detergent measuring spoon

detergent compartment separator plate (refer to
single sheet explanation note)
2. Two persons are required to remove the protective
plastic base from the bottom of the washer.
The base must be removed before use, without which
the washer may sustain damages.
5