Table of Contents
Advertisement
• Before using ASM, confirm that "COLOR" is set to "AUTO" and "SOUND" is set to proper system.
• First, use the ASM (Automatic Search Memory) function to preset all active channels in your area
automatically.
Then, arrange the preset channels with the SEARCH, SKIP and MFT (Manual Fine Tuning)
functions so that you can tune into only desired channels.
• When using the SEARCH function to preset channels, the AFT will automatically turn ON and
SKIP to OFF.
To preset channels (ASM)
To use the ASM function
1
Select the head of the position number to start the
ASM with the CH s, t buttons or Number
(0 – 9, –/--) buttons.
2
Press the MENU button, then press the
buttons to display the TUNING menu on the
screen.
3
Press the t or s buttons to select "ASM".
+
4
Press the
button to start the ASM. All active
channels will be preset automatically.
When presetting is
complete, the initial position number will reappear.
–
Press the
button to cancel ASM function.
After presetting
Check the preset channels by pressing the s or t
buttons.
• If the picture or sound of a certain channel is not good,
fine-tune the channel using the MFT function.
• If the color of a certain channel is abnormal, automatic
color system selection (AUTO) may malfunction, or sound
system selection is wrong. In such a case, select
another color and/or sound system.
PROGRAMMING CHANNEL MEMORY
–
+
or
To preset channels
(SEARCH, SKIP)
To use the SEARCH function
1
Press the MENU button, then press the
to display the TUNING menu on the screen.
Press the t or s buttons to select "SEARCH".
2
–
+
3
Press the
or
buttons to start searching.
+
The
button searches for higher-numbered channels.
–
Press the
button to cancel SEARCH function.
–
The
button searches for lower-numbered channels.
+
Press the
button to cancel SEARCH function.
Repeat this process until you can get the desired
channel.
When the desired channel is shown, press the t
4
button to select "position".
–
+
5
Press the
or
buttons repeatedly until the
position number to be preset.
6
When the desired program appears, press the t or
s buttons to select "MEMORY", then press the
button to memorize the channel at the current
position.
7
When you program other channels, repeat steps 2
to 6.
– 18 –
–
+
or
buttons
+
Advertisement
Table of Contents
