Sony S-Frame DPP-F800 Operating Instructions Manual page 47

Refer to "Sorting images (Filtering)"
(page 49).
4
Press MENU.
The delete confirmation screen is
displayed.
5
Press v/V to select [Yes] and then
press .
The image is deleted.
6
Press when the confirmation
screen is displayed.
To format the internal memory
1
Press MENU.
2
Press B/b to select the
3
Press v/V to select [Initialize] and then
press .
4
Press v/V to select [Format internal
memory] and then press
The confirmation screen used for
initializing the internal memory is
displayed.
5
Press v/V to select [Yes], then press
Notes
• Avoid doing the following while an image is being
deleted. Doing so may damage this unit, memory
card, or the data:
• When the message [Cannot delete a protected file.]
appears on the screen, the image file was set to
Read Only on a computer. In this case, connect this
unit to a computer, and delete this file using the
computer.
• The total capacity of the internal memory is not
equal to the remaining capacity, even immediately
after initialization.
• If deletion has started, the deleted image cannot be
recovered even if you stop deletion. Delete images
(Settings) tab.
only after confirming you actually want to delete
them.
Tips
• You can change the thumbnail size using [
.
the image list.
.
– Turning off the power
– Removing an memory card
– Inserting another card
/
] in
GB
47