Electrical Information; Identification Of Parts; Accessories - Daitsu APD12-AN User Manual

For your safety
• Do not store or use gasoline or other fl ammable vapours and liquids in the vicinity of this or any other
appliance.
• Avoid fi re hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any
prong from the power cord.

Electrical information

• Be sure the electrical service is adequate for the model you have chosen. This information can be found
on the serial plate, which is located on the side of the cabinet and behind the grille.
• Be sure the air conditioner is properly grounded. To minimize shock and fi re hazards, proper grounding
is important. The power cord is equipped with a three-prong grounding plug for protection against shock
hazards.
• Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend
to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualifi ed
electrician install the proper receptacle.
• Ensure the receptacle is accessible after the unit installation.

IDENTIFICATION OF PARTS

Accessories

PARTS
NOTE: Optional parts ( ), some models without.
The external appearance of the remote controller is for explanation purpose, the actual shape shall be
depended on the model you purchased.
• Check all the accessories are included in the package and please refer to the installation instructions for
their usage.
PARTS NAME
Exhaust hose and Adaptor I and Adaptor B (fl at
mouth)
Wall Exhaust Adaptor A ( )
Adaptor B (round mouth ( ))
Expansion Plug and wooden screw ( )
Window Slider Kit and bolt
Foam seal
Remote Controller and Battery
(For remote control models only)
Drain hose
QUANTITY
1 set
1 pc
1 set
4 / pc
1 set
3 / pc
1 pc
1 pc
16