Canon VB-C50I User Manual page 117

5. Enter picture recording settings when the
device detects motion (Recording tab).
Enter the settings for picture recording time and
recording interval when the device detects motion (ON
event) or when the device no longer detects motion
(OFF event).
q "Recording at ON event"
Check for picture recording when the device detects motion
(ON event).
w "Recording at OFF event"
Check for picture recording when the device no longer detects motion (OFF event).
Pre-event Recording time (sec.)
For setting the required number of seconds within a range of 0-10 seconds for recording pictures before
an ON or OFF event.
Pre-event Recording interval (sec.)
For setting the interval of time for picture recording before an ON and OFF event within a range of 0.1-
1.0 seconds.
Post-event Recording time (sec.)
For setting the required number of seconds within a range of 0-10 seconds for recording pictures for a
fixed time after an ON or OFF event.
Post-event Recording interval (sec.)
For setting the interval of time for picture recording after an ON and OFF event within a range of 0.1-1.0
seconds.
e "Enable audio recording concurrently with picture"*
Check to record audio for the time set for picture recording. If you enter a value of 0 both for the Pre-
event Recording time and Post-event Recording time, the VB-C50i/VB-C50iR performs audio recording
with the following configuration:
Pre-event Recording time: 1 second
Post-event Recording time: 0 second
*
Only available with two particular models (→ P.iii)
r "E-mail notification on picture recording"
Check to send an e-mail containing the recorded image in conjunction with ON/OFF events.
The e-mail notification is sent only once soon after an event occurs.
t "Recording between ON event and OFF event"
Check to record pictures when the camera is detecting motion (between an ON event and the next OFF
event).
Recording interval between events (sec.)
Sets an interval of 1 to 10 seconds between picture recordings when the camera is detecting motion
(between an ON event and the next OFF event).
● See "Relationship between ON and OFF events and picture/audio recording*"
(→ P.4-59) for the relationship between ON and OFF events in the picture and
Tip
audio recording* settings.
*
Only available with two particular models (→ P.iii)
● See "Setting Up Name Server Address and Mail etc." (→ P.3-26) for addressing of
mail messages and communication methods and "E-mail Notification Settings dialog
box" (→ P.4-60) for setting content of e-mails.
Schedule Setting Tool
○ ○ ○ ○ ○ ○ ○ ○ ○
Continued on the following page. a
q
w
e
r
t
4-47