Dubbing/Editing; Dubbing To Vcr, Dvd/Hdd Device, Etc - Sony DCR-VX2200E Operating Manual

Dubbing/Editing

Dubbing to VCR, DVD/HDD device, etc.

You can dub images played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders.
You can connect your camcorder to VCRs or DVD/HDD recorders, using the A/V connecting
cable (1), the A/V connecting cable with S VIDEO (2), or the i.LINK cable (3).
Connect your camcorder to a wall outlet (wall socket) using the supplied AC Adaptor for this
operation (p. 12). Refer also to the instruction manuals supplied with the devices to be
connected.
A/V Remote
Connector
To
(i.LINK)
: Signal flow
A A/V connecting cable and video
audio cable (supplied)
Connect to the input jack of another device.
B A/V connecting cable with S
VIDEO (optional)
When connecting to another device via the S
VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable, pictures can be
reproduced more faithfully than with the
supplied A/V cable connection. Connect the
white and red plugs (left/right audio) and S
VIDEO plug (S VIDEO channel) of an A/V
connecting cable. In this case, the yellow
Device without
an S VIDEO jack
IN
(Yellow)
(White)
(Red)
DV Interface
Device with an
S VIDEO jack
IN
VIDEO
AUDIO
(Yellow)
To i.LINK jack
(standard video) plug connection is not
necessary. S VIDEO connection only will not
output audio.
C i.LINK cable (optional)
Use an i.LINK cable to connect your
camcorder to another device equipped with an
i.LINK jack. The video and audio signals are
transmitted digitally, producing high quality
pictures and sound. Note that you cannot
output picture and sound separately.
S VIDEO
(Black)
VIDEO
(White)
AUDIO
(Red)
VCRs or
DVD/HDD
recorders
Continued ,
71