Dubbing/Editing; Connecting To A Vcr Or Tv - Sony RMT-830 Service Manual

Dubbing/Editing

Connecting to a VCR
or TV
Signal flow
*1 The supplied A/V connecting cable has a video
plug and an S video plug for the video connection.
*2 This connection produces higher quality DV
format pictures. When there is an S video jack on
the device to be connected, connect the S video
plug to that jack instead of using the yellow video
plug. The audio will not be output when you
connect with the S video plug alone.
b Notes on the A/V connecting cable
• When you connect your camcorder to the other
devices using the A/V connecting cable, make sure
the [DISPLAY] setting in the
menu is set to [LCD] (the default setting) before
connecting (p. 61).
• When you are connecting your camcorder to
monaural device, connect the yellow plug of the A/
62
Dubbing/Editing
Connecting with an i.LINK cable
A/V OUT jack
When you have an S video jack on your
TV or VCR*2
S video plug
(black)
Yellow
A/V connecting cable
(supplied)*1
White
(OTHERS)
You can record the picture from a VCR to a
tape inserted into your camcorder (p. 63).
You can also create a copy of the picture
recorded on your camcorder on other
recording device (p. 63).
Connect your camcorder to a TV or VCR as
shown in the following illustration.
DV Interface
i.LINK cable (optional)
i.LINK jack
To the audio/video
Red
input jacks
V connecting cable to the video jack, and the red or
the white plug to the audio jack on the VCR or the
TV.
To use an i.LINK cable for connection
Use an i.LINK cable (optional) to connect your
camcorder to the other device via the
Interface. The video and sound signals are
transmitted digitally, producing high quality
pictures. Note that you cannot record the picture
and sound separately. For details, see page 85.
VCRs or TVs
DV