Sony Handycam DCR-SR32E Instruction & Operation Manual page 79

A Current status of all DVD creation
B Current status per DVD
C Number of DVDs required
D Number of DVDs being created
When the DVD creation is completed,
the disc tray opens automatically.
b Notes
• During DVD creation, do not apply vibration to
the camcorder. The DVD creation may be
terminated.
• Make sure no other USB devices are connected
to your computer.
z Tips
• When you insert a burned DVD-RW/DVD+RW
in the DVD drive in step
asking if you want to delete data saved on a
DVD.
• When you cannot store all the recordable data
on a DVD, follow the on-screen instructions,
then insert a new DVD onto the DVD drive.
8
Once the completion dialog for
DVD creation appears, click
[Close] on the computer screen.
To create another DVD, click [Copy].
z Tips
• You can also create a DVD by selecting [DISC
BURN] on the [USB SELECT] screen of your
camcorder (p. 80).
• You can also create a DVD by selecting [One
Touch Disc Burn] in the HDD Handycam
Utility (p. 80).
3
, a message appears,
To disconnect the USB cable
1 Touch [END] on the LCD screen of
your camcorder.
2 Click the [Unplug or eject hardware]
icon on the task tray.
3 Click [Safely remove USB Mass
Storage Device].
4 Touch [YES] on the LCD screen of your
camcorder.
5 Disconnect the USB cable from the
Handycam Station and the computer.
b Notes
• Do not disconnect the USB cable while the
ACCESS lamp is lit.
• Before turning off your camcorder, disconnect
the USB cable following the proper procedures
described above.
• Disconnect the USB cable using the proper
procedures described above. Otherwise, files
stored on the hard disk of your camcorder or in a
"Memory Stick Duo" may not be updated
correctly. Also, disconnecting the USB cable
improperly may cause a malfunction of the hard
disk of your camcorder or of the "Memory Stick
Duo."
79