Super Nightshot; Color Slow Shutter - Sony Handycam DCR-SR32E Instruction & Operation Manual

2 Frame a white object such as a piece of
paper, to fill the screen under the same
lighting conditions as you will shoot
the subject.
3 Touch [
flashes quickly. When the white
balance has been adjusted and stored in
the memory, the indicator stops
flashing.
b Notes
• Set [WHITE BAL.] to [AUTO] or adjust the
color in [ONE PUSH] under white or cool white
fluorescent lamps.
• When you select [ONE PUSH], keep framing
white object while
• flashes slowly if [ONE PUSH] could not
be set.
• When [ONE PUSH] was selected, if
flashing after touching
to [AUTO].
• If you change the [WHITE BAL.] settings, the
[SCENE SELECTION] settings return to
[AUTO] automatically.
z Tips
• If you changed the battery pack, or moved your
camcorder to or from outdoors when [AUTO]
was selected, aim your camcorder at a nearby
white object with [AUTO] for about 10 seconds
for better color balance adjustment.
• If you change the [SCENE SELECTION]
settings or move your camcorder outdoors
during white balance setting with [ONE PUSH],
you need to repeat the [ONE PUSH] operation.
COLOR SLOW SHTR

(Color Slow Shutter)

When you set [COLOR SLOW SHTR] to
[ON], you can record an image brighter in
color even in dark places.
appears on the screen.
To cancel [COLOR SLOW SHTR], touch
[OFF].
b Notes
• Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
70
].
is flashing quickly.
, set [WHITE BAL.]
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.
• When the
available for DCR-SR190E/SR200E/SR290E/
SR300E only.
S. NIGHTSHOT PLS
(Super NightShot plus)
(DCR-SR32E/SR33E/
SR42E/SR52E/SR62E/
SR72E/SR82E)
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot plus
recording if you set [S. NIGHTSHOT PLS]
to [ON] while the NIGHTSHOT PLUS
switch (p. 27) is also set to ON.
keeps
appears on the screen.
To return to the normal setting, set [S.
NIGHTSHOT PLS] to [OFF].
b Notes
• Do not use [S. NIGHTSHOT PLS] in bright
places. This may cause a malfunction.
• Do not cover the infrared port with your fingers
or other objects.
• Remove the conversion lens (optional).
• Adjust the focus manually ([FOCUS], p. 67)
when it is hard to focus automatically.
• The shutter speed of your camcorder changes
depending on the brightness, which may result
in a slowdown of the motion of the image.

SUPER NIGHTSHOT

(DCR-SR190E/SR200E/
SR290E/SR300E)
The image will be recorded at a maximum
of 16 times the sensitivity of NightShot
recording if you set [SUPER
NIGHTSHOT] to [ON] while the
NIGHTSHOT switch (p. 27) is also set to
ON.
appears on the screen.
To return to the normal setting, set [SUPER
NIGHTSHOT] to [OFF].
(Still) lamp is lit, this item is