Sony Handycam DCR-SR32E Instruction & Operation Manual page 36

To set the aspect ratio according to the
connected TV (16:9/4:3)
Change the setting according to the screen
aspect ratio of the TV you will view images
on.
1 Turn the POWER switch to turn on the
camcorder.
(HOME) t
2 Touch
(SETTINGS) t [OUTPUT
SETTINGS] t [TV TYPE] t [16:9]
or [4:3] t
b Notes
• When you set [TV TYPE] to [4:3], the image
quality may deteriorate. Also, when the
recorded image's aspect ratio switches between
16:9 (wide) and 4:3, the image may jitter.
• On some 4:3 TVs, the still images recorded in
4:3 aspect ratio may not be displayed full
screen. This is not a malfunction.
• When you play back an image recorded in 16:9
(wide) aspect ratio on a 4:3 TV not compatible
with the 16:9 (wide) signal, set [TV TYPE] to
[4:3].
36
.
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or red
(right channel) plug to the audio input jack
of your TV or VCR. When you want to play
the sound in monaural mode, use a
connecting cable for that purpose.
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder (For models with the
printed on their bottom surfaces only). This
adaptor is designed for output use only.
mark
TV/VCR