NOMA 043-5641-2 Instruction Manual page 6

6
Model No. 043-5641-2
- WIND MODE BUTTON
This button is provided to select air supply mode,
and if it is pressed repeatedly, wind mode will
change cyclically in the sequence of CONTINUOUS,
NATURAL, SLEEP, SMART. A corresponding
indicator on the screen will display the current
fan mode. The four wind modes have the
following features:
Continuous wind:
constantly according to the wind speed level
set by the wind speed button. There are six speeds.
Natural wind: The fan will simulate natural wind
according to the pre-set program, and the delivered wind speed will change based on the
program. There are three speeds.
Sleep wind: The fan will simulate natural wind according to the pre-set program with three
wind speeds. The delivered wind is light and soft.
Smart wind: Based on current fan speed and room temperature when this mode is selected,
the fan speed can automatically increase or decrease one setting if room temperature
increases or decreases 33 °F (0,5 °C), until maximum or minimum fan speed is achieved.
When room temperature falls below 68 °F (20 °C), the fan will stop running and the "Smart"
icon in the display area will keep flashing; once room temperature reaches or surpasses
68 °F (20 °C), the fan will automatically resume running.
CAUTION: These are features designed for your comfort. They are not a malfunction.
- OSC BUTTON
Press this button to oscillate the fan left and right. To stop the fan from oscillating in the
position desired, press this button again.
contact us: 1-866-827-4985
The fan will deliver wind
8 hours timer
Continuous wind
6 speed setting
Oscillating
DISPLAY
Fig. 8
Sleep wind
Natural wind
Smart wind